how to make grass particles?

Biomass pellets have become a popular fuel in the fuel market. Due to high efficiency and low ash content, biomass particles will become the main fuel in the future.

Biomass particles are made of biomass materials such as wood, grass, rice husk, and alfalfa. These raw materials are processed into biomass particles through a granulator.

As a kind of biomass particles, grass particles have a wide range of applications and unique advantages, not only the market demand is huge, but also the price is much higher than other particles. So we can make grass pills at home? The raw materials are easy to get, how to turn waste into treasure? Today to introduce the method of making grass particles.

Advantages of grass granules
Many raw materials can be made into particles, and grass particles as fuel has always been a recognized method in Europe. Not only fuel, grass pellets as a feed is also a good choice.
2. Grass grain as biofuel is economical, energy-saving, environmentally friendly and sustainable. As a clean fuel, more and more people like to choose grass particles because the raw materials are cheap and easy to obtain.
In addition, grass pills can be used as feed for many animals such as horses and cattle. As feed, grass pill can replace part of hay feeding, rich in nutrients.

simple process
The production of grass pellets has great potential as a low-technology, small-scale renewable energy system that can be produced locally, processed locally, and traded locally, while having a positive impact on agricultural and pastoral areas. Raw materials are readily available and small granulator is easy to operate, which has become the choice of more people.

how to make grass particles?

The production process of grass pills

First of all, we need to choose the right grass granulator according to our own requirements. You can choose the right pellet machine according to the actual situation, you can also contact us for more detailed information about the pellet machine equipment!

After choosing the right pellet machine, you can start making your own grass pellets. The key to making grass granules is to adjust the moisture of the raw materials. The best moisture of the grass granules is about 15%. You can dry in the sun or use a dryer to adjust the moisture.

Precautions for particle processing:
1. Before operating the machine, the operator should carefully read the instruction manual and be familiar with the various technological processes of the equipment.
2, the production process, to strictly in accordance with the procedures and sequence of operation, and according to its requirements for installation and operation.
3. The host equipment needs to be installed and fixed on the horizontal concrete floor to reinforce the tightening screws.
4. Smoking and open fire are strictly prohibited in the production site.
5. After each startup, you need to idle for a few minutes before feeding.
6. It is strictly prohibited to add hard debris such as stone and metal to the feeding device. Iron removal shall be done before granulation to avoid damage to the granulation room.
7. During the operation of the equipment, it is strictly forbidden to use hands or other tools to transfer materials to avoid danger.
8. If there is any abnormal noise in the production process, the power supply should be cut off immediately, and the abnormal situation can be checked and handled before starting the machine to continue production.
9. Before stopping the machine, stop the auxiliary feeding first, then put in the oil, and stop the machine only after the die hole is full of oil and there is no oil in the granulation chamber. The purpose of adding oil is to make it easier to discharge the next production.
Operate the granulator correctly according to the requirements and pay attention to related matters according to the requirements, which can not only improve the output and operating performance of the equipment, but also extend the service life of the equipment.